YOUR TANK. YOUR TAPE MEASURE.
Measure the tank you have.
One notebook for the glass, the waterline and the space your hands need on maintenance day.
CHAPTER 01 / INSIDE THE GLASS
Put the measurements on the page.
Use centimeters, measured inside the aquarium to the planned waterline. The example below is illustrative. Displacement is the volume occupied by submerged material.
WORKING WATER
49 L gross minus 5 L displacement · about 11.62 US gallons working water.
Open the full volume calculator →Straight-sided rectangular tanks only. This estimate does not assess stocking, dosing, cycling, animal care or structural support. Formula and limits →
Keep the exterior separate.
These are exterior reference dimensions from Aqueon’s 2025 catalog, not usable interior measurements.
20.25 × 10.5 × 12.625 in30.25 × 12.5 × 12.75 inCHAPTER 02 / BEHIND THE RIM
A fit is more than a footprint.
Turn the filter assembly around, isolate the intake, then lift the basket. Check each service gap against the exact manufacturer’s instructions.
OPEN THE INTERACTIVE 3D STUDY ↗- Rim. Measure at the mounting point, including the frame.
- Rear gap. Find the narrowest space behind the housing.
- Lift-out path. Check the lid, light and shelf above the basket.
Read the filter clearance checklist → · Build a complete setup plan →
CHAPTER 03 / AT THE JUG
Carry the units to maintenance day.
About 2.91 US gallons in this illustrative arithmetic example. It is not a recommended water-change schedule.
Compare your own measured batch →Start with working water, then enter either a percentage or the batch you can measure. Keep liters and US gallons together instead of swapping unit systems mid-task.
CHAPTER 04 / KEEP A REFERENCE
The notes behind the numbers.
Article library → · Measurement field guide → · Documented gear and reading notes →
