Reference / Methods
Sources and method
Every plan combines your measurements with a small set of published manufacturer specifications.
US reference catalog v1.0 · Source check: 17 November 2026
Exterior reference dimensions
We use the item dimensions under Standard Aquariums in the 2025 Aqueon catalog (PDF). The brand’s separate critical-dimensions sheet (PDF) lists the 10 Leader as 12 9/16 inches tall, 1/16 inch shorter than the catalog’s 12.625 inches. The two sheets agree on length and width for the 10 and all three exterior dimensions for the 20 Long. Measure the tank you have. The planner never estimates the usable interior from the catalog.
Water volume
Gross litres = inside length × inside width × water depth in centimetres ÷ 1,000. For inches, the planner multiplies each dimension by 2.54 first. Working litres = gross litres minus submerged displacement in litres. One US gallon is 3.785411784 litres. The calculation assumes straight sides and a level waterline and does not account for water in external equipment.
Filter constraints
The Fluval US specification table lists the body dimensions and SKUs. The AC Series FAQ supplies the separate rear and rim limits. We apply the published inch figures as entered; a result right at the limit leaves no measurement margin.
A rear gap below 2.75 inches or a rim above 0.9 inches flags both models. If either value is missing, a shortlist waits for measurements. No overhead room flags a conflict; any other overhead measurement still needs a physical clearance check. There’s no verified service clearance figure for either model in the sources we used.
We do not rank by tank gallons. The tool does not assess flow, filtration capacity, cycling, animal care, lid compatibility or load bearing. Fluval’s installation manual (PDF) also specifies a waterline check relative to the filter outlet, which the planner cannot infer from water depth alone. Manufacturer documentation is the source for product facts; we have not conducted hands-on tests.
