Field guide / Measuring
The freshwater field guide
Measure the tank at the base, inside the glass and around the back rim. Each measurement answers a different question.
01 / Placement
Measure the base for placement
Measure the outside length and width at the widest points of the base, including the frame. Measure the stand’s usable surface in the same orientation. Include anything that eats into that space, such as a raised lip or backing.
Aqueon’s 2025 catalog gives both package and item dimensions. Use the item dimensions for rough planning and measure the actual tank before committing to the stand. A matching footprint alone does not tell you how the tank needs to be supported or how much the stand can carry. See Aqueon’s tank and stand guidance.
02 / Volume
Measure the water inside the glass
Use the clear inside length and width. Measure from the inside bottom to the waterline, clear of the rim. A line one inch lower on a tank with an inside base of 29.5 × 12 inches removes about 5.8 litres from the rectangular water column.
If your depth starts at the tank bottom, subtract the submerged volume of rock, substrate solids and fittings. Count each item once and leave out anything above the waterline; water in open spaces between substrate grains still counts as water. If you can’t estimate displacement, keep the gross figure as a starting point.
03 / Maintenance
Leave space to remove the basket
Check the full rim thickness where the filter will hang, and measure to the closest obstacle behind it. Fluval publishes a 2.75-inch minimum wall gap and 0.9-inch maximum rim thickness for the AC20 and AC30 in its AC Series help center.
Measure overhead before mounting lights or locating the tank under a shelf. Check that you can open the aquarium lid, lift the filter cover and basket, and reach the intake without moving the aquarium. Published filter body height does not tell you how much space you’ll need to lift the basket. See Fluval’s installation demonstration (YouTube) for the shape of the filter and how it mounts.
04 / On paper
Work through the numbers.
From a measured tank to a fishless cycle
Separate a volume calculation from water testing and the filter’s biological development.
Read the cycling guide →Example 01From waterline to working volume
Trace the difference between a 56.25 L water column and a 50 L working volume.
Read the measured-volume example →Example 02Check a measured water change
Compare an 8 L jug measurement to a tank tracked in US gallons.
Read the measured-batch example →