Worked guide / 01 · Waterline
From waterline to working volume
A box label can help identify a tank. For a worksheet, start with the waterline and account for the space your hardscape occupies below it.
A Freshwater Setup worked example. Dimensions and displacement are illustrative.
1. Sketch the water column
Our example has a clear inside length of 75 cm, an inside width of 30 cm, and 25 cm of depth from the inside bottom to the working waterline. The rectangle would hold 75 × 30 × 25 ÷ 1,000 = 56.25 L (14.86 US gal) with nothing in it.
Measure from the inside bottom if you plan to subtract substrate solids. If you measure from the top of the substrate instead, you’ve already left that layer out of the rectangle; subtracting it again would count it twice.
2. Subtract only what takes up space
Suppose the submerged solids displace 6.25 L. The working estimate is 56.25 − 6.25 = 50 L (13.21 US gal). Water between gravel grains is still water. For a removable solid that can be fully submerged, the rise in a graduated container gives its displacement; for pieces that sit partly above the tank’s waterline, count only the part below it.
When displacement is uncertain, record the gross estimate and what you left out. A dry tank that can be filled with measured batches offers a separate check; record the total added to reach the same waterline and do not subtract solids a second time.
3. Carry the working number forward
For this example, 18% of 50 L is 9 L (2.38 US gal), leaving 41 L (10.83 US gal) before refilling. Using the gross 56.25 L would instead give about 10.13 L. The difference comes from the starting number, not a conversion error. The 18% is a sample input for arithmetic, not a care recommendation.
The worksheet uses the NIST US gallon conversion and rounds only when it displays the result.
